Snowthrower Service & Repair

Snowblower Full-Service Procedure

•  Run unit to warm up.        
• Change engine oil.    
• Check engine, for oil leaks. (Look for any oily residue).
• Replace spark plug
• Check primer for cracks and make sure choke plate is closing properly
•  Check fuel line for cracks and brittleness.
•  Check recoil, and starter rope.
•  Check gear box oil level, also check for oil leaks.
•  Check drive belt or disk tension.
•  Check drive idler pulleys and bearings
•  Check drive and stop control cables
•  Spray silicon lubricant on chute rotation.
•  Check tire pressure
• Clean off all loose dirt, wash and polish.